Blackburn's Central Smart Headlight automatically adjusts its brightness to maximize battery life and visibility. - 18-500 Lumens - Intensity auto adjusts to ambient light - Runtime: 12.5 hrs Smart, 1.5 hrs High, 3 hrs Low and Strobe - USB: 4 hr recharge - Illuminated fuel gauge levels: Green=100-75%, Orange=75-25%, Red=25=0% - 195 grams
Bringing a rear light along is easy with Blackburn's magnetic Mars Taillight. - Red LED flashing light - 50 hours flash time - Strap to seat post - Clasp to sleeve - Wrap around dog collar
Ride on into the night with CatEye's Volt 700. This powerful, long-lasting LED light features a USB rechargeable, quick-charge lithium-ion battery and a brilliant 700-lumen output in a compact design with CatEye's no-tools handlebar mount (a helmet mount is also included). Five modes: high, normal, low, hyper constant and flashing allow choosing the best beam for the conditions and optimum run time. It also has a low-battery indicator.
With NiteRider's Mako 150 Combo you'll enjoy a safe commute under the stars. The Mako 150 features a bright 150 lumen Cree LED, steady and flashing modes (for increased daytime visibility) and "gills" that emit a red light so it can be seen from the side. This sweet light attaches to your handlebars without tools. To cover your back, you've got NiteRider's CherryBomb Taillight, which easily fits on your seatpost, seatstay, or backpack. Its 1/2 watt high-power LED is visible for up to 1 mile so you can announce your presence on the road.
Put it on your seatpost, put it on your seatstays, put it anywhere, Sunlite's Griplite goes everywhere. This powerful little LED light runs for a whopping 200 hours! It has steady and flashing modes and is housed in a water-resistant body.
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
Others out on the roads and paths will see you when Sunlite's HL-L515 Taillight is on your bike. It sports 5 bright amber colored LEDs, steady and flashing modes, and 150 hours of run time! A seatpost mount is included, too.
• 8 Lumen USB rechargeable LED front light • 3 modes (2 steady and 1 flashing) • Water resistant construction • Up to 12 hour run time
• 4 Ultra bright LED's • Waterproof design • Choose between red and white light by turning cover • Works for front or rear with ONE-CLICK • 120hr run time in flashing mode • Black
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g
Be seen with Sunlite's HL-L380/TL-L340 Combo. The front sports three bright Nichia LEDs, steady and flashing modes, and a 200-hour run time! A quick-release handlebar mount is included, too. What's more, the taillight has three LEDs, steady and flashing modes, and a quick-release mounting bracket.
See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.
Helmet mount for all systems that use the slider mounting clip System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Small, compact, quick and easy - there's no reason not to grab a pair of Cateye ORBs for your next ride. The ORB pairs a sleek, compact design housed in an alloy chassis. Conveniently, the lens itself serves as the light’s operating switch and is protected from inadvertent triggers due to the housing’s design while still allowing for side visibility. The ORB is available in front and rear versions and both feature 3 separate operating modes. Installation is quick and easy thanks to the heavy-duty rubber mounting strap and the rear version features an angled mount for seat post use. - Simple, lightweight and compact safety set perfect for kids and adults seeking a little more visibility - Easy installation and push button operation - Universal mounting strap easily attaches to bars from 22mm to 32mm - Side cut outs provide visibility from a wide angle for additional safety - Powered by two CR2032 cells per light
Liv's Nyx Click+ Headlight is named for the Greek goddess of the night. And, just like a goddess, you're sure to get noticed while riding thanks to its 40 lumen LED light that features steady and flashing modes. It mounts quickly to your handlebars with a rubber strap so you can focus on getting out the door. Recharging the li-ion battery is simple as well, just plug it in using a micro USB cable.
Liv's Nyx Click+ Taillight is a trusty companion when you head out in the evening hours. The Click's 15 lumen red LED light runs in a steady or flashing mode so you're sure to be noticed while riding. It mounts quickly to your bike with a rubber strap so you can focus on getting out the door and recharges via a Micro USB cable.
With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Knog's Blinder light series packs a huge amount of light into a tiny package. Through the flower-shaped lens, the optics are designed to direct light in a powerful beam pattern, while the waterproof body attaches to seatposts and handlebars with ease. A USB port allows for convenient recharging and tactile buttons make for easy operation, even while wearing gloves.
Knog's Blinder light series packs a huge amount of light into a tiny package. The optics are designed to direct light in a powerful beam pattern, while the waterproof body attaches to seatposts and handlebars with ease. A USB port allows for convenient recharging and tactile buttons make for easy operation, even while wearing gloves.
The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. Daylight Visible Flash (DVF) 80 lumen super bright tail light Easy on and off seat post strap mount with quick release tab Amber side lights for 180 degrees of visibility Convenient USB rechargeable Be Seen by cars = Be Safe FL1 Standard IP64, water resistant Lumen Output: 80 Run Time : 1:30 – 10:30hrs Charge Time: 1:30hrs Weight: 28g Battery: Li-Po WARRANTY The Sabre 80 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES LED Tail Light Seatpost Mount USB Cable
For seeing the road and staying safe, CatEye's EL135/Omni 3 Light Kit includes their fine EL135 headlight and Omni 3 taillight. To light the way, the compact headlight with its no-tools universal quick-release handlebar mount boasts 3 super-bright LEDs, constant and flashing modes, and CatEye's OptiCube lens technology for a wider, 150-candlepower beam with excellent visibility. Meanwhile, for the back, CatEye's Omni 3 with their FlexTight mount and included clothing clip can be placed almost anywhere and it uses their Omni Directional Technology for 360 degrees of visibility and boasts 3 ultra-bright LEDs plus constant, flashing and rapid modes.
Features: - 30 lumens (Numen+ Tag TL) ANSI standard approved - Runtime: Steady (5hrs), Low Steady (10hrs), Pulse (15hrs), Flash (30hrs), Random (50hrs) - Li-Po rechargeable battery - Power indicator - Auto start sensor - IPX4 Waterproof rating - Integrated USB plug - Flexible mounting system works with different shape handlebars and seatposts
Show Your Style! The Monkey Light M210 is a rugged, practical, high performance bicycle light that keeps you visible in all weather. The M210 straps to your spokes and displays brilliant patterns on your spinning bike wheel. Show your style with cutting edge themes designed by our electronic artists. The Monkey Light provides great front, rear and side visibility at any speed. It creates full color patterns on your spinning bike wheel at 10 to 40 mph (15 to 65 km/h). The 8-bit themes are instantly customizable - with on-board buttons you can choose the themes and colors to fit any situation. The M210 is easy to mount on the spokes of nearly any bike - Road, City, Cruiser, Mountain and BMX bikes. The light is perfect for daily commuters, urban cyclists, casual evening riders - anytime you want to be visible after dark. What's included: - 1 Monkey Light M210 Bike Light - 1 Hub-mounted battery holder (keeps wheel balanced) - 1 stainless steel anti-theft strap - 3 rubber mounting pads - 8 plastic mounting straps - instruction sheet - 2 year warranty Specifications - 80 Lumen brightness - 10 full color LEDs (5 on each side) - Power: 3 x AA batteries (any type), NIMH rechargeable provide best performance - Battery life: up to 40 hours - Fit: bicycle wheels 20" or larger. - Riding speed: up to 40 mph (65 km/h). Patterns visible above 8-10mph (12-15km/h). - Visibility: front and side visibility when mounted on front wheel; rear and side visibility when mounted on rear wheel. - Mounting: straps to spokes of wheel with vibration-proof mount (included). - Rugged IP67 composite construction designed for daily use in all weather - Made in USA
With different technologies for different urban riders, the Blinder MOB’s five dark characters come in front, rear and vertical rear lights. They have a range of weapons to beat the competition. Like 2 (front) or 3 (rear) interchangeable straps – including one to fit aero posts. Their beams range from ultra-focused to ultra-wide so they never get caught out. And you ain’t never seen flash patterns like these before. Take a look here at more of the MOB’s unique characteristics. FEATURES -LEDs : Surface Mount (SMT) LED designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. -BEAM ANGLE : 90° -BAR DIAMETERS : Fits bars / posts 22-32mm+ and aero. -INTEGRATED USB PLUG : Designed to be exposed to the elements, is waterproof and will not be damaged by exposure. -BUTTON : Longer button push on (0.75sec) prevents accidental turn on. Short presses switch modes continuously. -STORAGE MODE : Light can be placed in storage mode if not used for a long time (see instructions for full details). -STRAPS : Replaceable straps for tool-less attachment -100% WATERPROOF: The Blinder MOB is IP67 Tested and 100% waterproof against all elements
Page 1 of 2 Next page